Three Phase Pole Mount Transformer
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Productivity:||10000 SETS/ YEAR|
|Place of Origin:||China|
|Supply Ability:||15000 SETS/ YEAR|
|Certificate:||CE,ISO 9001, ISO 14001, OHSAS 18001|
Model No.: FG-SC(B)10 Series
Dry-type transformer is suitable for AC 50(60)Hz, three-phase maximum rated capacity is 2500kVA (single-phase maximum rated capacity is 833kVA, single-phase transformer is generally not recommended). Like ge dry transformers, the pole mount transformer from FGI also has smart design, top quality materials, high standard inspection and easy operation. The rated frequency of the earthing transformers is 50Hz. Its cooling method is 100~1000AN or according to customers’ needs. Its enclosure rating is IP20 or according to customers’ needs. The connection group label is dynll or according to customers’ needs. The temperature rise limit of the step up power transformer: insulation system temperature is 155 ° C, the maximum temperature is 100K.
Product Model Description
Conditions of Use
- Type of device: Indoor type
- Normal environmental conditions: Altitude does not exceed 1000m
- Ambient temperature:
Maximum temperature: +40℃
Minimum temperature: -25℃( When -25 ℃, it requires on-load switch and temperature controller)
Relative Humidity: 100%
Maximum daily average temperature: +30℃
Maximum annual average temperature: +20℃
- The installation site should be clean and free of electric dust, no corrosive gas, and have good ventilation conditions. If installed in a basement or other poorly ventilated location, ventilation should be mandatory. This cast coil transformer requires approximately 3~4m3/min of ventilation per 1KW (no-load loss + load loss).
- When installing the cast resin Current Transformer, it should generally leave the wall and other obstacles 800mm. There should be a distance of 300mm between adjacent transformers. For distribution boxes and other installations where space is limited, the above distances can be adjusted appropriately.
- Under normal circumstances, the cast resin dry type transformers can be placed directly in the use site, and the installation can be put into operation after the inspection is completed. For earthquake-proof and other special requirements, the base where the transformer is installed should be embedded with bolts and the transformers fixed by bolts and nuts.
1. Dry type transformers are safe, fire preventive, free of pollution and capable to be run directly in the load center.
2. Produced with the advanced technology, cast coil transformers feature high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability and long service life.
3. Dry distribution transformers feature low loss, low noise, obvious energy saving effect and are maintenance free.
4. Dry transformers feature good heat dissipation performance, strong over-load capacity and higher running capacity at forced air cooling.
5. Dry type distribution transformers feature good moisture-proof performance and suitable for high humidity and other harsh environments.
6. 3 phase dry type power transformers can be equipped with perfect temperature detecting and protection system. The intelligent signaling and temperature control system can automatically detect and display working temperature of three phase windings, automatically start and stop the fan and has the functions such as alarming and tripping.
7. cast resin dry type transformers feature small volume, light weight, small occupied space and low installation cost.
Rated Frequency: 50Hz
Cooling Method: 100~1000AN or according to customers needs
Enclosure Rating: IP20 or according to customers needs
Connection Group Label: Dynll or according to customers needs
Transformer Phase Sequence: The high pressure side is from left to right, the high pressure side is A, B, C, and the low pressure side is c,b,a. Winding Insulation Grade: F Level or according to customers needs
Insulation Level: 10KV grade power frequency withstand voltage 35KV, impact withstand voltage 75KV
20KV grade power frequency withstand voltage 55KV, impact withstand voltage 125KV
35KV grade power frequency withstand voltage 70KV, impact withstand voltage 170KV
Temperature Rise Limit: insulation system temperature is 155 ° C, the maximum temperature is 100K
|Rated Capacity(kVA)||No-load Loss (W)||Load Loss @different insulation endurance classes||Short Circuit Impedance(%)|
Product Series Description
1. Temperature Display, Temperature Control System
According to the user's requirements, the dry type transformers can be equipped with a temperature display and temperature control system. It acts as an overload warning signal and automatically displays the temperature. When the internal temperature of the coil exceeds the limit set by the signal thermometer, the fan can be started and stopped, the power supply is tripped, and the transformer is cut off.
2. Cooling System
The cooling method is self-cooling (AN). When self-cooling, the output capacity is 100%, and forced air circulation cooling (AF) can be overloaded for 25% for a long time and 50% for short-term overload.
3. Protection Level
The general protection level of the cast resin transformers is IP00, that is, the cast coil transformer is not equipped with the outer casing and is used indoors. If it is needed outdoors, it can be equipped with the outer casing and IP20 or IP23 (when the transformer protection level is high, the transformer derating operation should be considered). Note: The IP20 housing prevents solid foreign objects greater than 12mm from entering, providing a safety barrier to live parts. Based on the IP20, the IP23's protective case prevents water droplets from flowing within 60 degrees of the vertical line.
In Service in diverse Industries, Electricity Boards, Nuclear / Thermal / Hydel Power Plants, Railway Traction, High-Rise Buildings, Hospitals, Subways, Underground Vaults, Tunnels, Schools, Steel Factories, Chemical Plants, etc. Where safety is of prime concern.
Quality Environmental Certification
OEM Service is available
After-sales responding within 24 hours
One to one pre-sales consulting services
We are factory with high-tech professional engineer teams
Technician could be assigned to go abroad to carry out site commissioning and technical training
FGI SCIENCE AND TECHNOLOGY CO., LTD
FGI-Tech, a diversified electrical supplier and manufacturer, provides world class AC motor products - medium voltage drives and explosion-proof AC inverter, advanced power distribution systems and power quality solutions. FGI-Tech is committed to innovating energy technology to make broad contributions to the world in the fields of industry automation and energy power".
The FGI-Tech's medium voltage variable frequency drives, feature a unique technology that allows FGI-Tech to offer a simple, flexible and reliable drive solution. Building on many years of experience, FGI-Tech has demonstrated capability as innovator with an imaginative approach to the design and development of high performance electric power systems, enabling greater affordability, efficiency and reliability.
FGI-Tech's BPJV series mining explosion-proof and intrinsically safe AC inverter as one of the high-tech products which combine digital frequency speed regulation technology and related cooling technology. It is widely used in coal mine with coal dust, gas and other explosive dangerous environment, dragging speed governing operation of motor to achieve soft start and soft stop, stepless speed regulation and other functions when the motor is overloaded.
FGI-Tech's distribution transformers are manufactured using the highest quality materials, employing the most modern and reliable manufacturing practices. These Transformers are used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.
FGI-Tech's power quality products consist of static var generators (STATCOM). SVG is the best solution in the reactive power control field at present and has unparalleled advantages. It makes energy more efficient by stepless power factor correction. It is widely used in the application of Renewable power generation, Electrical welding systems, Industrial production machines and so on.
At FGI-Tech we believe in building strong relationships, helping our customers through the complete product life cycle, from selection and electrical system design through to commissioning assistance and after sales service and support. FGI-Tech supports electricity infrastructure with proven technologies to ensure that energy can be supplied in a stable, reliable, and optimal manner.
With standard controls, critical parts, packaged assemblies, and electrical/electronic components are stocked and ready to ship from FGI-Tech.
FGI-Tech aims to pursue innovation in energy and environment technology and to continue creating high-value-added, environmentally friendly products and systems that allow energy to be used stably and with maximum efficiency.
We hope that you are always holding FGI-Tech to high standards.
- Company Name: FGI SCIENCE AND TECHNOLOGY CO., LTD
- Representative: Mikhail Feng
- Product/Service: Medium Voltage Drives , Low Voltage Drives , Distribution Transformers , Dry Type Transformers , Static Var Generator , Static Synchronous Compensator
- Capital (Million US $): 500,000RMB
- Year Established: 2015
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: Middle section of jincheng road, economic development zone, wenshang county, shandong province
- Contact Person: Ms. Miranda Mu
- Tel: 86-86--13723461681
Premium Related Products